Commercial buildings have a lot of foot traffic, and the floors can take a beating. If your flooring can’t hold up to the capacity in how it’s used though, it will need to be frequently replaced. Plus, it will be uncomfortable to walk on, and your tenants will notice. So, what is the best flooring for a building which is used commercially?
- Concrete flooring
Concrete cleans easily and is very durable. When sealed adequately, it will resist water, and this type of flooring works well with radiant heating. Not only does it last long but it can be finished in a variety of different aggregates, colors, and stains.
- Luxury Vinyl Tile flooring
This flooring is also known as floating wood. It’s fused together with multi-layered flooring and a lamination process. It’s scratch, water, and noise resistant. It can replicate the appearance of wood, natural stone, and ceramic tile.
- Natural stone
This option is the most durable, but it is also the most expensive. The most resilient stones are sandstone, limestone, and granite which can withstand a significant amount of traffic and last for decades.
- Porcelain Tile flooring
This type of flooring has been used since ancient times in high traffic areas. It comes in various designs, styles, and décor. It has the versatility to fulfill any flooring job though.
- Epoxy floor coating
This is usually applied to floors which are concrete, and it makes for a smooth finish that withstands high traffic and lasts several years. It’s also non-porous, so mold, dirt, and other material can’t penetrate the flat surface. Although not as common, hardwood and tiles can be coated too.
- Polished concrete floors
Concrete floors can be used in commercial and industrial settings. Maintaining the concrete floor is easy. Dust mop on a day to day basis, and then wet mop it frequently. Dyes, stains, and textures can be added for a unique look.
You can give your commercial flooring different looks depending on what you use.
When you have a multi-family dwelling or rental properties, keeping the cost of utilities down is important. Installing high-efficiency toilets can help with this. If the tenant pays the water bill, it’s a good selling point too, or if you pay for the water, it helps you save money. If you have the water-intensive toilets in your building, they can use up to 7 gallons of water each time they’re flushed. A high-efficiency toilet uses about 55 percent less. So, what are your water efficient toilet options?
Water efficient toilet options
There are three different types of water efficient toilets. The single-flush will flush at 1.6 gallons each time, the dual-flush with 1.6 gallons for solids and 0.8 gallons for liquids. The third option is the pressure assist flush which is one gallon per flush.
The pressure assist toilets are used most often in commercial buildings, restrooms, and hotels. They can also be installed in private homes too. There’s a plastic pressure tank which is inside the reservoir of this commode. It compresses air inside the pressure tank from the pressure of the water line. It traps the air and compresses it as the main tank fills with water. The water is forced into the bowl by the compressed air when the commode is flushed. This action will push everything out with the flush with less water than other tanks use.
Another way to save on the water bill is to install low flow urinals in a men’s room. If you have a high traffic volume in the men’s room, a low flow urinal can save your money.
Figure it this way, you own a commercial building, and each employee uses the bathroom four times a day. So, you take the number of employees multiplied the number of flushes, and you’ll see that this is a lot of water. If you have toilets and urinals which conserve water though, you’ll find that the toilets are cost effective.
If you have a commercial property with older commodes, then you may want to consider updating your bathrooms with efficient ones.